Develop custom cropped skinny jeans for OEM, ODM or private-label collections. Reference HANAHLR06 combines a high-rise pull-on waist, close skinny leg, 7/8 length and functional side pockets. Its verified composition is 59% cotton, 30% polyester and 11% elastane, with a soft, lightweight hand and stretch-fabric.
Use this style as a starting point or adapt it to a buyer specification. Confirm the fit, length, fabric behavior, pockets, finish, measurements, labels and packaging through sampling before bulk production.
Quick Buyer Summary
see other jeans silhouette directions
| Item | Verified Reference / Development Direction |
|---|---|
| Product reference | HANAHLR06 |
| Product type | Women’s cropped skinny jeans |
| Rise and opening | High-rise pull-on construction |
| Silhouette | Close skinny fit with 7/8 length |
| Composition | 59% cotton, 30% polyester, 11% elastane |
| Stretch | Four-way stretch stated on the current page |
| Pockets | Functional side pockets |
| Finish | Classic denim appearance; exact finishing process not stated |
| Customization | Fit, length, pockets, fabric, finish, labels and packaging, subject to review |
| MOQ | Flexible MOQ Available |
What Must Be Approved Before Bulk Production?
Approve the pull-on opening, high-rise position, waist-to-hip balance, thigh and knee fit, 7/8 length, ankle opening, side-pocket placement and selected fabric on the finished garment. State whether measurements apply before or after finishing. If recovery, shrinkage, opacity or dimensional limits matter, define the method and acceptance criteria in the buyer specification; this page does not claim unverified results.
High-Rise Pull-On Fit Control
A pull-on jean must pass over the hip and return to the intended waist position. Waist opening, high hip, full hip, front and back rise, waistband depth and fabric behavior must therefore be developed together. A waist that looks correct when relaxed may still be difficult to dress or may gap after movement.
During sampling, review the waistband from the front, side and back and confirm the intended wearing position. Check access over the hip, top-edge rolling, waist gaping and the transition into the upper hip. Approve the actual project fabric and fit sample together rather than transferring dimensions from a different stretch quality.
Skinny-Leg and 7/8-Length Proportion
The close silhouette depends on the relationship between thigh, knee, calf, inseam and ankle opening. The 7/8 length also changes where the hem sits on the lower leg, so the approved length should be tied to the target size and grading plan rather than described only as “cropped.”
Define thigh, knee, calf, inseam, outseam and leg-opening POMs. Review the hem position with the intended footwear and target body measurements. Across sizes, check that the leg remains visually balanced and that the ankle opening can be dressed comfortably.
Stretch, Recovery and Opacity Approval
The current reference states stretch-fabric and a composition of 59% cotton, 30% polyester and 11% elastane. Those verified facts do not establish a numeric recovery, growth, shrinkage or opacity result.
Approve the selected fabric in garment form. Where performance limits are required, record the conditioning method, measurement method, wear or extension cycle and acceptance criteria in the technical specification. Recheck the knee, seat, waistband and lower leg after the agreed assessment because close fits make changes more visible.
Functional Side-Pocket Construction
On a close stretch fit, pocket angle, depth, bag shape and attachment can affect the front panel and side seam. An opening that is too loose may gape; excess pocket-bag bulk may show through the garment or restrict movement.
Define pocket opening length, depth, placement landmarks and reinforcement details in the tech pack. Review access, symmetry, bag coverage and the garment at rest and in movement. If the pocket construction changes, reapprove the fit sample.
Finish and Finished Measurements
see the denim sampling and approval process
The live page describes a classic denim finish but does not name a wash process or numeric shade standard. Use an approved garment, swatch or visual reference when a specific appearance is required. The selected finishing route can affect hand feel, stretch behavior and dimensions.
For repeat production, compare the finished garment with the buyer-approved sample or finish reference. Check shade direction, seams, waistband, pockets and final measurements. State clearly whether the measurement chart applies before or after finishing.
Review New Asia’s denim fabric and wash development when preparing the project specification.
Buyer Requirement and Approval Controls
| Buyer Requirement | Manufacturing Risk | Control Method | Approval Evidence |
|---|---|---|---|
| Pull-on access with stable high rise | Opening is restrictive, rolls or gaps | Review waist opening, rise, waist-to-hip balance and fabric together | Buyer-approved fabric and fit sample |
| Controlled skinny silhouette | Bagging, twisting or inconsistent taper | Define thigh, knee, calf and ankle POMs | Approved measurement chart and finished sample |
| Consistent 7/8 proportion | Hem position changes disproportionately across sizes | Define base-size length and grading direction | Approved graded spec or size-set evidence |
| Functional flat side pockets | Gaping, show-through, bulk or restricted access | Define opening, depth, bag and attachment | Approved pocket construction and fit sample |
| Required stretch behavior | Growth, opacity or recovery differs from expectation | Record project-specific method and acceptance criteria | Approved requirement and applicable project evidence |
| Stable finished measurements | Finishing changes waist, hip, length or opening | Define pre-/post-finish state and verify final garment | Finished measurement report against approved spec |
Private-Label Customization
Subject to development review, buyers can customize:
- high-rise position, waistband depth and waist-to-hip fit;
- thigh, knee, calf, inseam, 7/8 length and ankle opening;
- side-pocket opening, depth, bag and reinforcement;
- approved stretch-denim fabric, color and finish direction;
- topstitching and approved trim details;
- woven labels, care labels, hangtags and packaging.
Use the OEM clothing manufacturing route for a complete buyer specification. Projects starting from images, a reference garment or a partial concept can use the ODM development route. Compare other silhouettes in the custom jeans product range or review the skinny-jeans sourcing guide.
Current Reference Size Table
These are the measurements currently published for HANAHLR06. Confirm each POM definition, measurement state and tolerance before production use.
| Size | Length (in / cm) | Waist (in / cm) | Hip (in / cm) |
|---|---|---|---|
| XS | 34.6 / 88 | 26.6 / 67.5 | 36 / 91.5 |
| S | 35 / 89 | 28.0 / 71 | 37.4 / 95 |
| M | 35.4 / 90 | 30.5 / 77.5 | 40 / 101.5 |
| L | 35.8 / 91 | 33.5 / 85 | 42.9 / 109 |
| XL | 36.2 / 92 | 36.6 / 93 | 46.1 / 117 |
Flexible MOQ Solutions
- In-stock styles: No MOQ
- Existing styles with customization: From 50 pcs
- Custom T-shirts, Hoodies & Sweatpants: From 100 pcs/color
- Garment-dyed products: From 150 pcs/color
- Denim & Other Fashion Garments: From 300 pcs/style
MOQ depends on whether the project uses stock, modifies an existing style or requires new development. Current stock is not implied. Share quantity, colors and customization scope for review.
Sampling and Bulk Planning
Typical Sample Development: 5–10 days after key product requirements are confirmed.
Typical Bulk Production: 15–30 days after sample approval and material readiness.
Fabric, finish, revisions, pockets, trims and approvals can affect timing. Confirm the project schedule before ordering.
Care Reference
Wash separately in cold water before first wear. Machine wash cold inside out with like colors. Do not bleach. Tumble dry low. Cool iron if needed. Confirm the final care label for the selected fabric, finish and destination market.
What to Send for a Quotation
request a development assessment
Send a tech pack, measurement chart, reference garment or product images. Include the target size range, high-rise position, pull-on waist, skinny fit, 7/8 length, pockets, fabric, finish, branding, packaging, quantity and destination. State any required stretch, recovery, shrinkage, opacity, testing or tolerance criteria.
Email [business@shanghai-newasia.com.cn](mailto:business@shanghai-newasia.com.cn) for sampling and quotation review.
