Develop custom skinny cargo jeans for OEM, ODM or private-label collections. Reference HANAHLR07 combines a mid-rise pull-on waist, close skinny fit, ankle length, washed denim appearance and functional cargo and side pockets. Its verified composition is 59% cotton, 30% polyester and 11% elastane, with stretch-fabric and a lightweight hand.
Use the style as a reference or adapt it to a buyer specification. Confirm fit, pockets, wash, measurements, labels and packaging through sampling.
Quick Buyer Summary
review jeans references for line planning
| Item | Verified Reference / Development Direction |
|---|---|
| Product reference | HANAHLR07 |
| Product type | Women’s skinny cargo jeans |
| Rise and opening | Mid-rise pull-on construction |
| Silhouette | Close skinny fit with ankle length |
| Composition | 59% cotton, 30% polyester, 11% elastane |
| Stretch | Four-way stretch stated on the current page |
| Pockets | Functional cargo pockets and side pockets |
| Finish | Washed denim appearance; exact process to be confirmed |
| Customization | Fit, length, pockets, fabric, wash, labels and packaging, subject to review |
| MOQ | Flexible MOQ Available |
What Must Be Approved Before Bulk Production?
Approve the pull-on opening, mid-rise position, waist-to-hip balance, skinny leg measurements, ankle opening, cargo-pocket construction, side-pocket placement, selected fabric and washed appearance on the finished garment. Define any numerical recovery, shrinkage, opacity, pocket-load, seam-strength or dimensional criteria in the buyer specification. This page does not claim unverified results.
Pull-On Access and Mid-Rise Fit
A pull-on jean must pass over the hip while returning to the intended waist position. Waist, high hip, full hip, front and back rise, waistband depth and fabric recovery therefore work together. The mid-rise position should be defined through measurements and the intended wearing point rather than by a label alone.
During sampling, review the waistband from front, side and back. If the top edge rolls, gaps or shifts, assess the pattern and fabric behavior together. The approved sample should confirm dressing access without losing the intended waist and hip fit.
Skinny-Leg Proportion and Stretch-Fabric
This style is close through the thigh, knee and lower leg before finishing at the ankle. Four-way stretch supports movement, while recovery affects whether the knee, seat and lower leg retain the approved shape after wear. Pocket weight and wash processing can also influence the way a lightweight stretch fabric hangs.
Define thigh, knee, inseam, outseam and leg-opening POMs. Approve the actual project fabric in garment form. Where stretch, growth, recovery, shrinkage or opacity limits apply, record the assessment method and acceptance criteria in the technical specification.
Cargo-Pocket Construction on a Close Fit
Cargo pockets create more risk on skinny jeans than on a relaxed utility silhouette. Pocket size, placement, flap depth and attachment affect the visible thigh width and can pull on the side seam. A bulky pocket bag or heavy contents may also change how the close-fitting leg sits.
Specify the pocket dimensions, placement landmarks, flap and closure details, seam allowance and reinforcement method. Review symmetry, access, pocket-bag coverage and the interaction with the wearer’s movement. If the pocket size changes, recheck the leg fit rather than treating it as decoration only.
Side Pockets and Front Balance
The side-pocket opening must remain accessible while sitting flat against the hip. Its angle, depth and bag attachment can affect the front panel and side seam, particularly in stretch-fabric fabric.
Define the opening and pocket bag in the tech pack, then approve placement on the fit sample. Check for show-through, twisting or unwanted bulk before bulk cutting.
Washed Finish and Finished Measurements
review denim development and repeatability controls
The reference has a washed denim appearance, but no wash chemistry or numeric shade standard is published. Provide an approved garment, swatch or visual reference. Review the finish on the selected fabric because processing can affect shade, hand feel, stretch behavior and dimensions.
For repeat production, compare shade direction, fading placement, seams, waistband, pockets and finished measurements with the buyer-approved sample or wash standard. State whether measurement requirements apply before or after finishing.
Review New Asia’s denim fabric and wash development when preparing the project specification.
Buyer Requirement and Approval Controls
| Buyer Requirement | Manufacturing Risk | Control Method | Approval Evidence |
|---|---|---|---|
| Pull-on access with stable mid rise | Waist opening is restrictive or does not recover | Review opening, waist-to-hip relation, rise and fabric together | Buyer-approved fabric and fit sample |
| Controlled skinny ankle fit | Bagging, twisting or inconsistent leg profile | Define thigh, knee, length and opening POMs | Approved measurement chart and finished sample |
| Balanced cargo pockets | Pocket bulk distorts the close leg or side seam | Define dimensions, placement, flap, bag and reinforcement | Approved pocket construction and fit sample |
| Flat side-pocket opening | Gaping, show-through or front-panel distortion | Review angle, depth, attachment and access | Approved sample and construction specification |
| Required stretch behavior | Growth, opacity or fit loss differs from expectation | Record project-specific method and acceptance criteria | Approved requirement and applicable project evidence |
| Repeatable washed finish | Shade or dimensions drift from the approved reference | Approve finish on selected fabric and compare finished garments | Retained buyer-approved wash reference |
Private-Label Customization
Subject to development review, buyers can customize:
- mid-rise position, waistband depth and waist-to-hip fit;
- thigh, knee, inseam, ankle opening and skinny ease;
- cargo-pocket size, position, flap and closure;
- side-pocket opening, depth and pocket bag;
- approved stretch-denim fabric, color and wash direction;
- topstitching and approved trim details;
- woven labels, care labels, hangtags and packaging.
Use the OEM clothing manufacturing route for a complete specification. Projects beginning with images, a reference garment or a partial concept can use the ODM development route. Compare other silhouettes in the custom jeans product range.
Current Reference Size Table
These are the measurements currently published for HANAHLR07. Confirm each POM definition, measurement state and tolerance before production use.
| Size | Length (in / cm) | Waist (in / cm) | Hip (in / cm) |
|---|---|---|---|
| XS | 37.2 / 94.5 | 26.6 / 67.5 | 36 / 91.5 |
| S | 37.6 / 95.5 | 28.0 / 71 | 37.4 / 95 |
| M | 38 / 96.5 | 30.5 / 77.5 | 40 / 101.5 |
| L | 38.4 / 97.5 | 33.5 / 85 | 42.9 / 109 |
| XL | 38.8 / 98.5 | 36.6 / 93 | 46.1 / 117 |
Flexible MOQ Solutions
- In-stock styles: No MOQ
- Existing styles with customization: From 50 pcs
- Custom T-shirts, Hoodies & Sweatpants: From 100 pcs/color
- Garment-dyed products: From 150 pcs/color
- Denim & Other Fashion Garments: From 300 pcs/style
MOQ depends on whether the project uses stock, modifies an existing style or requires new development. Current stock is not implied. Share quantity, colors and customization scope for review.
Sampling and Bulk Planning
Typical Sample Development: 5–10 days after key product requirements are confirmed.
Typical Bulk Production: 15–30 days after sample approval and material readiness.
Fabric, wash, revisions, pocket complexity, trims and approvals can affect timing. Confirm the project schedule.
Care Reference
Wash separately in cold water before first wear. Machine wash cold inside out with like colors. Do not bleach. Tumble dry low. Cool iron if needed. Confirm final care labeling for the destination market.
What to Send for a Quotation
share your sampling requirements
Send a tech pack, measurement chart, reference garment or product images. Include the size range, rise, pull-on waist, skinny fit, length, cargo and side pockets, fabric, wash, branding, packaging, quantity and destination. State any required stretch, recovery, shrinkage, opacity, testing or tolerance criteria.
Email [business@shanghai-newasia.com.cn](mailto:business@shanghai-newasia.com.cn) for sampling and quotation review.
