Develop high-rise fit denim shorts for OEM, ODM or private-label collections. Reference HANAHLR05 combines a wide high-rise pull-on waistband, close short-length fit, stretch-fabric denim appearance and functional side pockets. Its verified composition is 59% cotton, 30% polyester and 11% elastane, with a soft, lightweight hand.
The displayed style can be used as a reference or adapted to a buyer specification. Confirm the waistband construction, fit, length, fabric behavior, pockets, finish, measurements, labels and packaging through sampling. “Tummy control” describes the current design direction; any required compression or shaping performance must be separately defined and approved.
Quick Buyer Summary
review related denim shorts development options
| Item | Verified Reference / Development Direction |
|---|---|
| Product reference | HANAHLR05 |
| Product type | Women’s high-rise stretch denim shorts |
| Waist | Wide pull-on waistband |
| Fit | Close fit with short leg proportion |
| Composition | 59% cotton, 30% polyester, 11% elastane |
| Stretch | Four-way stretch stated on the current page |
| Pockets | Functional side pockets |
| Finish | Classic denim appearance; exact process not stated |
| Customization | Fit, length, pockets, fabric, finish, labels and packaging, subject to review |
| MOQ | Flexible MOQ Available |
What Must Be Approved Before Bulk Production?
Approve the pull-on opening, high-rise position, waistband depth, waist-to-hip balance, crotch and seat fit, short length, leg opening, side-pocket placement and rear overlay construction on the finished garment. Confirm what the published “3-inch” measurement represents before using it in a specification. Define any recovery, compression, shrinkage, opacity or dimensional requirements with a test or assessment method; this page does not claim unverified results.
Wide Pull-On Waistband and Fit Control
The waistband must stretch over the hip and return to the intended high-rise position. Opening circumference, waistband depth, high hip, full hip, front rise and back rise work together. A visually smooth waist can still be difficult to dress, roll at the top edge or gap after movement if the pattern and fabric are not balanced.
During sampling, review dressing access and the waist from front, side and back. Confirm the intended wearing position, upper-hip transition and waistband attachment. If the buyer requires a defined high-rise-fit effect, record the construction and measurable acceptance criteria rather than relying on the product name alone.
Short Length and Leg-Opening Proportion
The live page calls this a 3-inch-length style, but it does not identify the measurement point. Before production, confirm whether 3 inches refers to inseam or another POM. Also define outseam, front and back rise, crotch extension, thigh and leg opening.
Review coverage and mobility on the fit sample. Across sizes, the length and opening should retain the approved visual proportion rather than change through simple uniform scaling. State the base size and grading direction in the measurement specification.
Stretch, Recovery and Opacity Approval
explore denim development capabilities
The verified fabric composition and stretch-fabric statement support a close, flexible fit, but they do not establish numeric recovery, growth, shrinkage, opacity or compression results. These properties can influence the waistband, seat, front rise and leg opening after wear and finishing.
Approve the actual project fabric in garment form. Where limits matter, specify conditioning, extension or wear cycles, measurement points and acceptance criteria. Recheck the garment after the agreed assessment and compare it with the approved sample.
Side Pockets and Curved Panel Construction
The visible front uses curved pocket openings beneath the wide waistband. Pocket angle, depth, bag shape and attachment can affect access and create show-through or bulk on a close fit. The back shows a curved overlay/yoke direction that contributes to the style’s identity and requires clear symmetry and seam-placement references.
Define pocket opening, depth, bag coverage, reinforcement, curved seam shape and placement landmarks in the tech pack. Review both sides for symmetry and check the pockets and rear construction while the garment is worn and moving.
Finish and Finished Measurements
The current page states a classic denim finish but does not identify a wash chemistry or numeric shade standard. Provide an approved garment, swatch or visual reference when a particular color or surface effect is required. Finishing may affect shade, hand feel, stretch behavior and dimensions.
State whether the measurement chart applies before or after finishing. For repeat orders, compare waist, hip, rise, length, leg opening, pockets, curved seams and shade direction with the buyer-approved finished sample.
Review New Asia’s denim fabric and wash development when preparing the product specification.
Buyer Requirement and Approval Controls
| Buyer Requirement | Manufacturing Risk | Control Method | Approval Evidence |
|---|---|---|---|
| Accessible, stable high-rise waist | Opening is restrictive, rolls or gaps | Develop opening, rise, waist-to-hip balance and fabric together | Buyer-approved fabric and fit sample |
| Defined high-rise-fit direction | Subjective claim is interpreted as guaranteed performance | Specify construction and any measurable requirement | Approved sample plus buyer-defined criteria |
| Consistent short proportion | Coverage or leg opening changes across sizes | Confirm inseam/outseam POM and grading direction | Approved measurement chart and size-set evidence |
| Functional side pockets | Opening gaps or pocket bag shows through | Define angle, depth, bag, attachment and reinforcement | Approved pocket construction and fit sample |
| Consistent curved rear detail | Overlay shape or seam placement becomes asymmetric | Set templates and placement landmarks | Approved construction drawing and sample |
| Required stretch behavior | Growth, opacity or recovery differs from expectation | Record project-specific method and acceptance criteria | Approved requirement and applicable project evidence |
| Stable finished measurements | Finishing changes waist, hip, rise or length | Define measurement state and verify finished garments | Measurement report against approved spec |
Private-Label Customization
Subject to development review, buyers can customize:
- waistband depth, high-rise position and waist-to-hip fit;
- front/back rise, inseam, outseam, thigh and leg opening;
- side-pocket opening, depth, bag and reinforcement;
- curved panel or overlay shape and seam placement;
- approved stretch-denim fabric, color and finish direction;
- topstitching and approved trim details;
- woven labels, care labels, hangtags and packaging.
Use the OEM clothing manufacturing route for buyer-supplied specifications. Projects starting from images, a garment or an incomplete concept can use the ODM development route. Compare other styles in the custom denim shorts range or consult the jean-shorts sourcing guide.
Current Reference Size Table
These measurements are currently published for HANAHLR05. Confirm every POM definition, the pre-/post-finish measurement state and tolerances before production use.
| Size | Length (in / cm) | Waist (in / cm) | Hip (in / cm) |
|---|---|---|---|
| XS | 11.6 / 29.5 | 26.6 / 67.5 | 36 / 91.5 |
| S | 12 / 30.5 | 28.0 / 71 | 37.4 / 95 |
| M | 12.4 / 31.5 | 30.5 / 77.5 | 40 / 101.5 |
| L | 12.8 / 32.5 | 33.5 / 85 | 42.9 / 109 |
| XL | 13.2 / 33.5 | 36.6 / 93 | 46.1 / 117 |
Flexible MOQ Solutions
- In-stock styles: No MOQ
- Existing styles with customization: From 50 pcs
- Custom T-shirts, Hoodies & Sweatpants: From 100 pcs/color
- Garment-dyed products: From 150 pcs/color
- Denim & Other Fashion Garments: From 300 pcs/style
MOQ depends on whether the project uses stock, modifies an existing style or requires new development. Current stock is not implied. Share quantity, colors and customization scope for review.
Sampling and Bulk Planning
Typical Sample Development: 5–10 days after key product requirements are confirmed.
Typical Bulk Production: 15–30 days after sample approval and material readiness.
Fabric, finish, revisions, panel construction, trims and approvals can affect timing. Confirm the project schedule before ordering.
Care Reference
Wash separately in cold water before first wear. Machine wash cold inside out with like colors. Do not bleach. Tumble dry low. Cool iron if needed. Confirm the final care label for the selected fabric, finish and destination market.
What to Send for a Quotation
send your product requirements
Send a tech pack, measurement chart, reference garment or product images. Include the target size range, high-rise position, waistband construction, required high-rise-fit direction, confirmed length POM, pockets, curved rear detail, fabric, finish, branding, packaging, quantity and destination. State any required stretch, recovery, compression, shrinkage, opacity, testing or tolerance criteria.
Email [business@shanghai-newasia.com.cn](mailto:business@shanghai-newasia.com.cn) for sampling and quotation review.
