Develop custom denim midi skirts for OEM, ODM or private-label collections. Reference HANAHLR08 combines a high-waisted pull-on construction, close bodycon midi silhouette, front slit, side pockets and washed denim appearance. Its verified composition is 59% cotton, 30% polyester and 11% elastane, with stretch-fabric and a lightweight hand.
Use the displayed style as a development reference or adapt it to a buyer specification. Confirm fit, measurements, slit position, wash, pockets, labels and packaging through sampling.
Quick Buyer Summary
compare denim skirt product directions
| Item | Verified Reference / Development Direction |
|---|---|
| Product reference | HANAHLR08 |
| Product type | Women’s stretch-denim midi skirt |
| Waist | High-waisted pull-on construction |
| Silhouette | Close bodycon midi fit |
| Composition | 59% cotton, 30% polyester, 11% elastane |
| Stretch | Four-way stretch stated on the current page |
| Opening | Front slit |
| Pockets | Side pockets |
| Finish | Washed denim appearance; exact process to be confirmed |
| Customization | Fit, length, slit, fabric, wash, pockets, labels and packaging, subject to review |
| MOQ | Flexible MOQ Available |
What Must Be Approved Before Bulk Production?
Approve the pull-on waistband, waist-to-hip balance, finished midi length, front-slit height and overlap, pocket placement, selected fabric and washed appearance on the finished garment. If numerical recovery, growth, shrinkage, opacity, seam-strength or dimensional tolerances apply, define the method and limits in the buyer specification. No unverified test result is claimed here.
Pull-On Waist and Waist-to-Hip Balance
The pull-on opening must pass over the hip while returning to the intended high-waist position. Waist, high hip, full hip, front and back rise, waistband depth and fabric recovery therefore work as one fit system. A waist measurement alone cannot confirm that the skirt is easy to put on or stable during wear.
Define the relevant POMs and intended wearing position before sampling. Review the waistband from front, side and back. If the top edge rolls, gaps or shifts, assess the pattern and fabric together rather than altering only one flat measurement.
Stretch-Fabric and Bodycon Fit
Four-way stretch supports the close hip fit and movement required by this silhouette. Recovery matters because excessive growth can change the waist, hip and slit position after wear. The lightweight construction may also respond differently to washing than rigid denim.
Approve the actual project fabric in garment form. When numerical stretch, recovery, growth, shrinkage or opacity criteria are required, include the assessment method and acceptance limit in the technical specification. Composition alone does not establish those results.
Front-Slit Position and Mobility
The front slit provides movement in the close midi silhouette, but its height, overlap and reinforcement must be coordinated with finished length and hip fit. A slit that begins too high changes coverage; one that is too short can restrict stride. Distortion at the top of the opening can also affect the front appearance.
Specify the slit start point, finished opening, seam allowance and reinforcement method. Review standing, walking and sitting positions on the fit sample. Approve front-panel balance, hem level and the relationship between the slit and center-front seam.
Side-Pocket Construction
Side pockets must remain usable without adding visible bulk to the bodycon silhouette. Opening angle, pocket-bag depth and attachment can affect the side seam and hip area. The selected fabric’s stretch may also influence whether the opening stays flat.
Define pocket placement and construction in the tech pack, then review access, bag coverage and side-seam balance on the sample. Recheck the fit if pocket shape or depth changes.
Washed-Finish and Measurement Approval
see how denim development is controlled
The reference has a washed appearance, but the current page does not identify a specific wash chemistry or numeric shade standard. Provide an approved garment, swatch or visual reference. Review the finish on the selected fabric because processing can affect shade, hand feel, stretch behavior and dimensions.
For repeat production, compare shade direction, fading placement, seams, waistband, pockets, slit and finished measurements with the buyer-approved sample or wash standard. State whether production measurements apply before or after finishing.
Learn more about denim fabric and wash development when preparing the project specification.
Buyer Requirement and Approval Controls
| Buyer Requirement | Manufacturing Risk | Control Method | Approval Evidence |
|---|---|---|---|
| Pull-on access and stable high waist | Opening is restrictive or waistband does not recover | Review waist opening, hip relationship, rise and fabric together | Buyer-approved fabric and fit sample |
| Controlled bodycon midi fit | Gaping, restriction, twisting or upward movement | Define waist, hip, rise, length and hem POMs | Approved measurement chart and finished sample |
| Functional front slit | Restricted stride, excessive opening or distortion | Define slit height, overlap and reinforcement; review movement | Approved construction and fit sample |
| Flat side pockets | Bulk, show-through or side-seam distortion | Define opening, pocket bag, attachment and placement | Approved pocket construction sample |
| Required stretch behavior | Growth, opacity or fit loss differs from expectation | Record project-specific method and acceptance criteria | Approved requirement and applicable project evidence |
| Repeatable washed finish | Shade or dimensions drift from the approved reference | Approve finish on selected fabric and compare finished garments | Retained buyer-approved wash reference |
Private-Label Customization
Subject to development review, buyers can customize:
- waistband depth, rise and waist-to-hip fit;
- skirt length, bodycon ease and hem opening;
- front-slit height, overlap and reinforcement;
- approved stretch-denim fabric, color and wash direction;
- side-pocket shape, depth and placement;
- topstitching and approved trim details;
- woven labels, care labels, hangtags and packaging.
Use the OEM clothing manufacturing route for a complete specification. Projects beginning with a reference garment, images or a partial concept can use the ODM development route. Compare other silhouettes in the denim-skirts product range.
Current Reference Size Table
These are the measurements currently published for HANAHLR08. Confirm each POM definition, measurement state and tolerance before production use.
| Size | Length (in / cm) | Waist (in / cm) | Hip (in / cm) |
|---|---|---|---|
| XS | 29.5 / 75 | 26.6 / 67.5 | 36 / 91.5 |
| S | 29.9 / 76 | 28.0 / 71 | 37.4 / 95 |
| M | 30.3 / 77 | 30.5 / 77.5 | 40 / 101.5 |
| L | 30.7 / 78 | 33.5 / 85 | 42.9 / 109 |
| XL | 31.1 / 79 | 36.6 / 93 | 46.1 / 117 |
Flexible MOQ Solutions
- In-stock styles: No MOQ
- Existing styles with customization: From 50 pcs
- Custom T-shirts, Hoodies & Sweatpants: From 100 pcs/color
- Garment-dyed products: From 150 pcs/color
- Denim & Other Fashion Garments: From 300 pcs/style
MOQ depends on whether the project uses stock, modifies an existing style or requires new development. Current stock is not implied. Share quantity, colors and customization scope for review.
Sampling and Bulk Planning
Typical Sample Development: 5–10 days after key product requirements are confirmed.
Typical Bulk Production: 15–30 days after sample approval and material readiness.
Fabric, wash, pattern revisions, trims, approvals and quantity can affect timing. Confirm the final schedule for the project.
Care Reference
Wash separately in cold water before first wear. Machine wash cold inside out with like colors. Do not bleach. Tumble dry low. Cool iron if needed. Confirm final care labeling for the destination market.
What to Send for a Quotation
Send a tech pack, measurement chart, reference garment or product images. Include the size range, pull-on waist, fit, length, slit, pockets, fabric, wash, branding, packaging, quantity and destination. State any required stretch, recovery, shrinkage, opacity, testing or tolerance criteria.
Email [business@shanghai-newasia.com.cn](mailto:business@shanghai-newasia.com.cn) for sampling and quotation review.
