Develop custom knit denim jeans for OEM, ODM or private-label collections. Reference FSLFD2518-MM combines a mid-rise five-pocket construction, straight leg, ankle-length proportion and broad turned cuffs that expose the lighter reverse side. Its verified composition is 59% cotton, 30% polyester and 11% elastane, with a soft, lightweight hand and four-way stretch stated on the current page.
The product name and fabric close-up support a knit-denim direction. Confirm the actual knit structure, fabric weight, stretch/recovery and shrinkage specification before quotation, labeling or bulk production. Use the displayed style as a reference or adapt it to a buyer specification.
Quick Buyer Summary
compare broader jeans product directions
| Item | Verified Reference / Development Direction |
|---|---|
| Product reference | FSLFD2518-MM |
| Product type | Women’s knit-denim straight-leg jeans with rolled cuffs |
| Rise | Mid rise |
| Length | Ankle/cropped proportion; current table lists 90–94 cm |
| Composition | 59% cotton, 30% polyester, 11% elastane |
| Stretch | Four-way stretch stated on the current page |
| Hem | Broad turned cuff with contrast reverse side |
| Closure | Top button and zip-fly direction visible; confirm final BOM |
| Pockets | Five-pocket direction with front scoop/coin and rear patch pockets |
| Finish | Medium and dark blue faded directions; exact process not stated |
| MOQ | Flexible MOQ Available |
What Must Be Approved Before Bulk Production?
Approve the knit-denim fabric specification, rise and waist-to-hip balance, fly and pocket construction, thigh/knee/leg-opening measurements, cuff depth, cuff attachment, finished inseam/outseam and hem position. State whether measurements apply before or after finishing and whether length is measured with the cuff turned. Define any required stretch, recovery, shrinkage, spirality, opacity or tolerance criteria in the buyer specification.
Confirm the Knit-Denim Specification
review denim sampling and finishing capabilities
Fiber composition alone does not identify knit structure, yarn, fabric weight, stretch ratio, recovery or shrinkage. These factors influence the denim appearance, seam stability, pocket shape, knee growth and cuff behavior.
Approve a fabric standard and finished garment rather than relying only on the product name. Where performance limits apply, document conditioning, test or measurement method and acceptance criteria. Do not substitute a visually similar woven stretch denim without buyer approval.
Rolled-Cuff Construction and Finished Length
The broad cuff is the primary visual detail. Define finished cuff depth, turn direction, seam position, tack or attachment method, topstitching and whether the cuff is permanently secured or intended to be adjustable. The reverse-side tone and side-seam allowances remain visible and must finish cleanly.
The live body incorrectly calls the style floor length. Approve inseam, outseam and hem position with the cuff in its intended finished state. Record whether length is measured before or after turning the cuff to avoid production discrepancies.
Straight-Leg and Ankle Proportion
The straight silhouette depends on the relationship among hip, thigh, knee and leg opening. The wide cuff adds visual weight at the hem, so cuff circumference must match the leg opening without twisting, flaring outward or restricting the opening.
Approve the base-size leg and cuff proportions first. Review the size set so cuff depth, hem position and straight-leg balance remain intentional across XS–XL.
Mid-Rise Fit and Fly Construction
Define front rise, back rise, waistband depth, high hip and full hip as one fit system. The visible top button and fly direction should be confirmed through the BOM, including zipper, shield, extension, button and belt-loop details.
Review fly alignment, waistband closure and pocket openings on the worn sample. Stretch knit denim may require different stabilization from conventional woven denim; approve the selected construction in the finished garment.
Pockets and Topstitching
Front scoop pockets, coin-pocket direction and rear patch pockets give the style a familiar five-pocket appearance. Define pocket dimensions, openings, bag material, placement, reinforcement and topstitching. Review whether the pocket bags show through or distort the softer fabric.
Contrast/golden stitching is visible in the reference. Confirm thread color, ticket, stitch density and critical seam paths on the approved sample rather than treating the image as a complete sewing specification.
Finish, Stretch and Finished Measurements
The gallery shows medium and dark blue faded directions, but no wash chemistry or numeric shade standard is published. Provide an approved garment, swatch or visual reference for each version. Finishing can change shade, hand feel, cuff behavior, stretch response and dimensions.
For repeat production, compare waist, pockets, seams, cuff, leg shape and finished measurements with the approved finished reference. Review New Asia’s denim fabric and wash development when preparing the specification.
Buyer Requirement and Approval Controls
| Buyer Requirement | Manufacturing Risk | Control Method | Approval Evidence |
|---|---|---|---|
| Approved knit-denim character | Fabric structure or hand differs from expectation | Define construction, weight and performance requirements | Approved fabric standard and garment sample |
| Consistent rolled cuff | Depth, twist or reverse-side exposure varies | Specify turn, attachment, seam and cuff measurement | Approved cuff construction and finished sample |
| Correct ankle length | Length is measured in different cuff states | Define measurement state and finished hem position | Approved measurement chart and fit sample |
| Stable straight-leg proportion | Knee/opening or cuff balance changes across sizes | Define leg POMs and review size-set grading | Approved base size and size set |
| Required stretch behavior | Growth, recovery or opacity differs from expectation | Record project-specific methods and limits | Approved requirement and applicable evidence |
| Repeatable finish | Shade or dimensions drift after processing | Approve each finish and measure final garments | Retained references and measurement report |
Private-Label Customization
Subject to development review, buyers can customize:
- knit-denim structure, verified composition, weight and hand-feel direction;
- rise, waistband, waist-to-hip fit and grading;
- thigh, knee, inseam, outseam and leg opening;
- cuff depth, reverse-side contrast, attachment and topstitching;
- fly, button, belt loops and pocket construction;
- color, wash/fade direction and thread color;
- woven labels, care labels, hangtags and packaging.
Use the OEM clothing manufacturing route for complete buyer specifications. Projects starting from an image, reference garment or partial concept can use the ODM development route. Compare other silhouettes in the custom jeans range.
Current Reference Size Table
These measurements are currently published for FSLFD2518-MM. Confirm every POM definition, cuff state, measurement state and tolerance before production use.
| Size | Waist (in / cm) | Hips (in / cm) | Length (in / cm) |
|---|---|---|---|
| XS | 25.2 / 64 | 37.0 / 94 | 35.4 / 90 |
| S | 26.8 / 68 | 38.6 / 98 | 35.8 / 91 |
| M | 28.7 / 73 | 40.6 / 103 | 36.2 / 92 |
| L | 31.7 / 80.5 | 43.5 / 110.5 | 36.6 / 93 |
| XL | 34.6 / 88 | 46.5 / 118 | 37 / 94 |
Flexible MOQ Solutions
- In-stock styles: No MOQ
- Existing styles with customization: From 50 pcs
- Custom T-shirts, Hoodies & Sweatpants: From 100 pcs/color
- Garment-dyed products: From 150 pcs/color
- Denim & Other Fashion Garments: From 300 pcs/style
MOQ depends on whether the project uses stock, modifies an existing style or requires new development. Current stock is not implied. Share quantity, colors and customization scope for review.
Sampling and Bulk Planning
Typical Sample Development: 5–10 days after key product requirements are confirmed.
Typical Bulk Production: 15–30 days after sample approval and material readiness.
Fabric development, finish, fit revisions, cuff construction, trims and approvals can affect timing. Confirm the project schedule before ordering.
Care Reference
Wash separately in cold water before first wear. Machine wash cold inside out with like colors. Do not bleach. Tumble dry low. Cool iron if needed. Confirm the final care label for the selected knit-denim fabric, finish and destination market.
What to Send for a Quotation
request an order-specific quotation
Send a tech pack, measurement chart, reference garment or product images. Include the knit-denim specification, rise, size range, five-pocket/fly construction, leg POMs, cuff depth and attachment, finished length, color/finish, branding, packaging, quantity and destination. State any required stretch, recovery, shrinkage, spirality, opacity, testing or tolerance criteria.
Email [business@shanghai-newasia.com.cn](mailto:business@shanghai-newasia.com.cn) for sampling and quotation review. You may request the displayed style, a modified version, a similar product or a buyer-designed development.
